Ebtech Hum Eliminator - 2 Channel XLR
2-Channel hum and noise eliminator with 1/4" Smart Jacks and XLR jacks. Jacks can be used in any combination.
Ebtech Hum Eliminator products use custom isolation transformers to break loop antenna that causes hum and buzz. The Hum Eliminator also converts back and forth between balanced and unbalanced connections and prevents the cable from acting as an antenna for noise. Simply place a channel of the Hum Eliminator on the cable connections between the two offending pieces of equipment. The Hum Eliminator will not affect the quality of the audio.
Ebtech uses 1/4" smart jacks that accept any combination of unbalanced(TS) or balanced(TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards and top quality components and hardware.
- Prevents ground loops that cause hum and buzz. Uses custom made isolation transformers
- Converts back and forth between unbalanced and balanced connector types
- Simply insert on audio connections between offending pieces of gear
- Not intended for use on mic level, instrument level, or powered speaker lines
|Connectors||TRS 1/4, XLR|
|Number of Channels||2|