Professional Digital Monitoring System
Free Shipping!
Exclusive Acoustical Technologies
- 40 kHz Bandwidth Beryllium Tweeter
- Focus Ring
- The "W" Cone
- Passive Radiator
Advanced Digital Technologies
- 24 Bits 96kHz Converters
- Multiple Equalisation Facilities
- "Sweet Spot"
- Remote Control Facilities
High Performance Amplification
- High Efficiency, Low Distortion Class "D" Output Stages
Exclusive Acoustical Technologies
40 kHz Bandwidth Beryllium Tweeter
The reversed dome tweeter is a hallmark of Focal. As a result of more than twenty years of development into a tweeter that could produce a high output, but without requiring high energy input and without increasing directivity. And now the company is ready to make a major leap forward with the introduction of the pure Beryllium version.
Focus Ring
This innovative and patented magnetic structure provides extremely strong flux density (2T) with the highest thermal stability achievable.
The "W" Cone:
For more than 15 years the composite cone sandwich technology is a Focal exclusivity. The "W" process - first initiated in 1995 with the Grande Utopia - now provides a true optimisation of the frequency response by fine tuning of mass, rigidity and damping parameters.
Passive Radiator:
In order to reproduce the lowest frequency range within a very small volume the SM11 is equipped with a no compromise, custom designed "W" passive radiator.
Advanced Digital Technologies
24 Bits 96kHz Converters:
In addition to a direct digital input, the SM11 uses the latest high quality chipsets performing 24 Bits 96kHz A/D and D/A conversion.
Multiple Equalisation Facilities:
The combination of powerful DSP devices and carefully designed algorithms allows multiple and very precise equalisation.
"Sweet Spot"
A dedicated processing algorithm enables to optimise and tailor the SM11 response according to the listener's position with regards to the speakers.
Remote Control Facilities
The SM11 can be remotely controlled from various sources: PC/Mac dedicated "Focal manager" software, PDA, MIDI link or proprietary remote control unit.
High Performance Amplification
- High Efficiency, Low Distortion Class "D" Output Stages
- Tri-amplified (250W Rms/Bass, 150W Rms/Midrange, 100W Rms/Treble), the SM11 uses low distortion class "D" power stages for low and mi-frequency channels, reducing dramatically heat at high power, while wide bandwidth class AB stage is used for the tweeter.
General
* Frequency response 34Hz - 40kHz
* Maximum SPL 118dB SPL (peak @ 1m)
Electronic Section
* Input Type/Impedance: Electronically balanced / 10 kOhms
* Connector: XLR
* Sensitivity: Adjustable, +4dBu or -10dBV
* Digital Input: AES, XLR, 44.1, 48, 88.2 or 96kHz
* LF amplifier stage: Class D / 250W Rms
* MF amplifier stage: Class D / 250W Rms
* HF amplifier stage: Class AB / 100W rms
* Power supply Mains voltage: 230V/115V
* IEC inlet and detachable power cord
* System Control: Switchable between Wireless Infra-Red (handheld, Serial RS-232 (PC / Mac), MIDI
* Hardware controls: Left / Right AES channel selection, Analog input Sensitivity
* Indicator: Power on LED
Transducers
* Woofer: "W" cone, long excursion Focal 11W5551B 11" drive unit
* Passive Radiator: "W" piston, extra wide surround Focal 11WPP51 11" radiator
* Midrange: "W" cone Focal 6W0451 6" drive unit with push-pull Neodymium magnet
* High frequency: Focal TBUSM11 Beryllium dome tweeter with Focus Ring magnet
* Shielding: Integral through cancellation magnets or by magnet design
Cabinet
* Construction: 19mm and 25mm MDF panels with internal braces
* Finish: Slate grey metallic lacquer on side panels. Dark red veneer on top / bottom, corners in stained solid wood
* Dimensions: (HxWxD) 338mm x 600mm x 340mm - (13.3"x23.6"x13.4")
* Weight: 25kg - (55lbs)
All specifications are subject to change.
